TAPS

WATER TAPS The water taps can be supplied with an oil bath poppet with EPDM seal or with a 1/4 turn ceramic poppet. nMaximum working pressure 10 Bar. Nozzle with possibility of disassembly according to DIN 12898 standard. Handles according to EN13792:2000 standard, made of acid-resistant PP. Threads in accordance with ISO228/4 standard , tolerance class B. The taps are built following the DIN12918 standard. PURE WATER TAP Pure water taps are manufactured in RAL7032 color, and allow the water dispensed to come into contact only with PP and never with metals or other polluting materials. The opening and closing system is a PP ceramic head with 90° rotation and can work up to 6 bars of pressure. All models made of PP are supplied with a G ½” male threaded leg and a G ¼” female thread that allow a PP connector to be screwed inside for your Bo with an outer diameter of 8 mm and an inner diameter of 6 mm. The threaded leg also has a flat double cap. 17 for easier closing of the fixing nut and for easier mounting of the PP tube connector inside. All taps are also supplied with a PP rosette, with the chemical abbreviation for water laser-printed following the EN13792 standard, as well as the textual indication. All the taps are supplied with removable nozzle G ½” TAP FOR TECHNICAL GASES The taps for technical gases are supplied with refined regulation head valve, with PTFE gasket. Fixed nozzle according to DIN12898. Handles according to EN 13792:2000 and made of acid-resistant PP. Threads in accordance with ISO228/1, tolerance class B. r The taps are built following the DIN 12918 standard. The oxygen and hydrogen taps are equipped with a head lubricated with specific and approved grease. Maximum working pressure - 10 Bar. Taps finished with powder paint acid resistant epoxy.